kbp200 - kbp210 prv : 50 - 1000 volts io : 2.0 amperes publication order number: [ kbp200 - kbp210 ] ? bruckewell technology corporation rev. a - 2014 features ? high case dielectric strength ? high surge current capability ? high reliability ? low reverse current ? low forward voltage drop ? ideal for printed circuit board ? rohs compliant package m echanical d ata ? case : molded plastic ? epoxy : ul94v - o rate flame retardant ? terminals : plated lead solderable per mil - std - 202, method 208 guaranteed ? polarity : polarity symbols marked on case ? mounting position : any ? weight : 3.4 grams packing & order information 500/box graphic symbol maximum ratings and electrical characteristics rating at 25 c ambient temperature unless otherwise specifie. single phase, half wave, 60 hz, resistive or inductive load for capacitive load, derate current by 20% rating symbol kbp 200 kbp 201 kbp 202 k bp 204 kbp 206 kbp 208 kbp 210 unit maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward cur rent tc = 50c i f(av) 2.0 a rating for fusing ( t < 8.3 ms. ) i 2 t 10 a 2 s typical thermal resistance (note 2) r ja 30 c /w
kbp200 - kbp210 prv : 50 - 1000 volts io : 2.0 amperes publication order number: [ kbp200 - kbp210 ] ? bruckewell technology corporation rev. a - 2014 rating at 25 c ambient temperature unless otherwise specifie. single phase, half wave, 60 hz, resistive or inductive load for capacitive load, derate current by 20% rating symbol kbp 200 kbp 201 kbp 202 kbp 204 kbp 206 kbp 208 kbp 210 unit peak forward surge current, single half sine wave superimposed on rated load (jedec method) i fsm 60 v maximum forward voltage per diode at f = 1.0 a v f 1.0 v maximum dc reverse current ta = 25 c i r 10 v at rated dc blocking voltage ta = 100 c i r(h) 1.0 a typical junction capacitance per diode (note 1) c j 24 pf operating junction temperature range t j - 55 to +125 c storage temperature range t stg - 55 to +125 c notes (1) measured at 1.0 mhz and applied reverse voltage of 4.0 volts. (2) thermal resistance from junction to ambient with units mounted on a 0.47" x 0.47" ( 12mm x 12mm ) cu. pads.
kbp200 - kbp210 prv : 50 - 1000 volts io : 2.0 amperes publication order number: [ kbp200 - kbp210 ] ? bruckewell technology corporation rev. a - 2014 rating and characteristic curves ( kbp200 - kbp210 ) fig. 1 - derating curve for output rectified current fig. 2 - maximum non - repetitive peak forward surge current fig.3 - typical forward characteristics per diode fig.4 - typical reverse characteristics
kbp200 - kbp210 prv : 50 - 1000 volts io : 2.0 amperes publication order number: [ kbp200 - kbp210 ] ? bruckewell technology corporation rev. a - 2014 disclaimer all produ ct, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. bruckewell technology inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively , bruckewell), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. bruckewell makes no warranty, representation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, bruckewell disclaims (i) any and all liability arising out of the application or use of any product. (ii) any and all liability, including without limitation special, consequential or incidental damages. (iii) any and all implied warranties, including warranties of fitness for particular purpose, non - infringement and merchantability. statements regarding the suitabili ty of products for certain types of applications are based on bruckewells knowledge of typical requirements that are often placed on bruckewell products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. parameters provided in datasheets and/or sp ecifications may vary in different applications and performance may vary over time. product specifications do not expand or otherwise modify bruckewells terms and conditions of purchase, including but not limited to the warranty expressed therein.
|
